1. Use Tripod – Although it’s a quick
exposure, you’ll get the best results setting your camera on a
tripod. Remember that you want detail and any kind of motion blurring
can ruin the shot.
2. Use Telephoto lens – For a good moon
shot you’ll need a telephoto lens. You don’t need an expensive
one but for good detail a minimum of 300mm is recommended.
3. Use Shutter Release cable –
Recommended. The pressure of your fingers on the shutter button will
increase the motion blur. To avoid this you can get a shutter release
cable and use the shutter delay feature of your camera. A 2 sec delay
is more than enough to get your hands of the camera.
Start with the following settings:
- Aperture at f/11
- ISO 100 (you don’t want any noise
on your photo and it’s so bright there is really no need to go
above 100)
- 1/125 – 1/250
Now set your auto focus to point, aim
at the moon, focus and turn the auto focus off. Don’t touch that
ring anymore.
For good measure bracket your EV 1 or 2
units (if your camera allows you can get a few sequential shots with
different EV values).
An example is shown below.
Nikon D90 DSLR: ISO 200, Aperture f/11, Shutter Speed 1/250.
Canon
EOS Rebel XSi: ISO 100, Aperture f/11, Shutter Speed 1/125.
Read more: http://photographylife.com/how-to-photograph-moon#ixzz2FVhHtabW
No comments:
Post a Comment